Chevron Industrial Applications

Rando® HD oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and stationary systems.

This is available in the following ISO Viscosity Grades: ISO 10, 22, 32, 46, 68, 100, 150, 220 and 320.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

Rando® HDZ oils incorporate antiwear additives, oxidation and corrosion inhibitors, foam and aeration suppressants, and a shear stable viscosity index improver. Hydraulic systems, due to the nature of their operation, experience accelerated wear unless they are protected by clean, high quality antiwear hydraulic oils. Surging pressures in pumps and valves can increase metal-to-metal contact unless antiwear protection is present. The antiwear additives in Rando® HDZ oils plate out on the metal surfaces. This plating minimizes metal-to-metal contact, which is most severe in vane-, piston-, and gear-type pumps. As hydraulic pressures increase over 1000 psi, the need for antiwear protection increases proportionally. In laboratory efficiency testing, Rando® HDZ oils provided up to 5% improvement in overall hydraulic pump efficiency when compared to a typical monograde hydraulic oil like Hydraulic Oil AW (a lower VI product with VI<105).

This is available in the following ISO Viscosity Grades: ISO 15, 22, 32, 46, and 68.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

Meropa® gear lubricants are premium quality extreme pressure gear oils with excellent load carrying capacity, water demulsibility, oxidation stability, and corrosion protection. Meropa® gear lubricants are recommended for industrial enclosed gearing where an AGMA extreme pressure lubricant is specified. Bath, splash, circulating, or spray mist lubrication as applicable to the proper viscosity grade. This is a general industrial plant lubrication where the performance properties of an AGMA extreme pressure lubricant is required.

This is available in the following ISO Viscosity Grades: ISO 68, 100, 150, 220, 320, 460, 680, 1000 and 1500.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

Meropa® Synthetic EP is a high-quality industrial EP gear lubricant. Meropa® Synthetic EP lubricants are developed from an advanced formulation that provides exceptional load carrying and antiwear properties; protection against rust, corrosion, foaming, and oxidation; and excellent demulsibility. This formulation provides outstanding performance in most types of industrial gearboxes, exemplified by the FZG pass stage results of >12. These products possess very high shear stability even under heavily loaded, high-speed conditions in industrial gears.

This is available in the following ISO Viscosity Grades: ISO 150, 220, 320, 460 and 680.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

Meropa® XL gear oils are premium high-performance gear oils, offering long lubricant life, corrosion protection, excellent wear protection with high load carrying capacity, and robust micropitting wear protection. They are designed for use in industrial and marine gear systems where extreme load and shock load protection is required.

This is available in the following ISO Viscosity Grades: ISO 68, 150, 220, 320, 460 and 680.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

Regal R+O oils ISO 32 through ISO 150 are recommended for use in most electric motor bearings, air compressors, gears, hydroelectric turbines, steam turbines, marine turbines, and non-heavy-duty hydraulic systems where OEM recommends R+O type oils (for heavy-duty hydraulic systems, customers should consider Rando HD oils). These products can also be used as a general-purpose machine oil for shop use when an R+O type of oil is needed or is recommended. The multifunctional characteristics of Regal R+O type oils may allow them to replace other special application lubricants, which can result in reduced inventory and operating cost.

This is available in the following ISO Viscosity Grades: ISO 22, 32, 46, 68, 100, 115, 150, 220, 320, 460, and 680.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

GST® Oils are formulated with premium base oil technology. They are designed to meet the critical demands of non-geared gas, steam, and hydroelectric turbine bearing lubrication. GST® Oils are also used for reduction gear lubrication in marine operations. They are an excellent recommendation for many other industrial applications including air compression where R+O type oils are recommended.

GST® Oils are formulated with premium base oil technology and an ashless, zinc-free formulation that provides exceptional oxidation stability, water separability, and protection against rust and corrosion. Higher temperatures in advanced gas and steam turbines require circulating system oil with exceptional high-temperature stability. GST® Oils have outstanding thermal and oxidation stability. Non-volatile oxidation inhibition minimizes the evaporative loss of the inhibitors, a common problem with turbine oils, where bearing temperatures are high and system capacities are limited. With retained oxidation resistance for long periods under high-temperature conditions, GST® Oils will promote long oil service life and help minimize turbine downtime.

This is available in the following ISO Viscosity Grades: ISO 32, 46, 68, and 100.
Available Package Sizes: 5-Gallon Pail, 55-Gallon Drums, and Bulk.

As a First Source Chevron Marketer, we carry the full product lines of Chevron Lubricants, Coolants, and Greases so we can stock all the products you need. Not all of our products are listed here on our web site. So, please call an Ottsen Expert for more information on the many oil and lubricant choices you have with Chevron.